LANTAO Sampler copper sewage sampling tank petrochemical oil sample sampling barrel bottle (1000ml)

Bottom sampler instructions: 1. One end of the antistatic sampling rope is firmly grounded, and the insulation and paint can not be taken at the site. The other end of the antistatic sampling rope is firmly connected with the bottom sampler. 2, before sampling, touch the tank with hand to eliminate static electricity. 3, the bottom of which is not larger than 1 meters / second speed falls to the bottom of the container, when the bottom foot touch the bottom of the container, open the valve into the oil, there will be no bubble. The bubble Chang proposed at the bottom, the transfer of sample collection can be completed at the bottom of the sample, sampling after dry storage. 4, when the bottom sampler put forward, should make the bottom sampler as far as possible don't touch metal tank, in order to avoid electrostatic discharge 5. During the whole sampling process, the bottom sampler, the antistatic sampling rope and the grounding point must be firmly connected so as to smoothly guide the static table

• Sampling method: Slowly drop the sampler to the sampling part, shake the rope hard, the cap opens automatically, the liquid oil will enter and foam, and the sampler will be pulled when there is no air bubble. Complete sampling
• Does not contain rope